All-sun Handheld Oscilloscope+Multimeter Single Channel Waveform



  • Model: buyonme
  • Shipping Weight: 1kg
  • Units in Stock: 32

$99.88


Add to Cart:



All-sun 25MHz 100MSa/s Digital 2 in1 Handheld Portable Oscilloscope+Multimeter Single Channel Waveform USB LCD Backlight EM125


This handheld oscilloscope is a portable waveform measurement tool and fulfills basic electronic engineering requirements.
It is one of the best 2 in 1 test tools in outdoor testing or teaching.
The high speed AD sampler and CPU can convert the analog signal into digital signal and show on the  128X64 LCD backlight display. 
The high speed comparator can get good edge trigger to present  steadiness.
Its multimeter part uses a dedicated chip (6000-count), which can provide a higher precision.
The large capacity lithium battery can ensure 10 hours working after  fully charged.
The plug meets American  and European  standards.
 
AUTO Key: 
The oscilloscope will set the parameters to input signal  in the most suitable way.
The multimeter measurement range will switch autom atically.
 
Scopemeter Specification:
 
Bandwidth (-3dB)       25MHz
Sampling Rate           Max 100M Sa/s
Channel                     1
Coupling                     AC , DC
Rise Time                   <17.5nS
Input Impedance        1MΩ,<=20pF
Max Input Voltage      CAT II 300V
Vertical Resolution      8bit
Vertical Sensitivity       50mV / div -20V/div
Horizontal Resolution  10nS/div
Horizontal Sensitivity   10nS/div - 5S/div
Record Length            0.1K/Channel
Trigger Mode              Auto , Rising edge , Falling edge
Screen                        128x64, with LED backlight
Battery                        3.7V lithium battery, about 1000mAH
Charger                       Input Voltage : 100-240V ac , Output: DC5V+-10% , 1000mA
Size                             174 x 92 x 40 mm
Weight                         330g 
Display                     6000counts
Input                            Max Input Voltage: CAT II 600V
Continuity Test            In 600Ω range, beeps at<25Ω
Diode Test
                                     If voltage drop of the diode under test is more than 2V or
                                     if input terminals are open, the display will show ”OL”.
                                     If voltage drop is less than 0.25V, the built-in buzzer will sound.
Capacitance               6.000Nf-6Mf,7 ranges
Resistance                 600.0Ω-60.00MΩ,6 ranges
Voltage                      6V-600V,3 ranges

Vertical System: channel of scope:
 
Bandwidth (-3Db)                                25MHz
Accuracy                                                50Mv/div: ±3% of full scale
Vertical Offset Accuracy(DC)            ±0.2div±2mV±0.5% of offset
Trigger                                                  DC to 20MHz:0.8div
 
Specification of probe:
           
Rise Time    
                                X1 23.3ns      
                                X10 17.5ns
Bandwidth
                                 X1 DC to 15 MHz
                                 X10 DC to 25 MHz
Input Impedance
                                   X1 1MΩ
                                   X10 10MΩ(without scope's input resistance 1 MΩ
Input Capacitance
                                     X1 46Pf(without scope's input resistance 1 MΩ)
                                     X10 about 15pF

Multimeter  Specification  Accuracy Form:±(% of reading +digits)

All-sun Digital 2 in 1 Handheld Protable

Package Includes:

1pc x   Scopemeter 
1pc x  20MH ( 10:1 ) Probe 
1pc x Test lead 
1pc x Charger 
1pc x Built-in battery (1200 mAh) 
1pc x User manual 
1pc x  Carrying bag

This product was added to our catalog on Wednesday 24 May, 2017.

 
We Prefer PayPal Western Union HSBC Singapore Post UPS http://www.tnt.com http://www.ems.com.cn http://www.dhl.com
Copyright © 2017 Buyonme.net
Your IP Address is: 54.224.18.114
wastrong template