Mercedes Benz SMART Key teach in



  • Model: buyonme
  • Shipping Weight: 0.2kg
  • Units in Stock: 26

$78.88


Add to Cart:



Smart key teach-in is a kind of dongle key programmer that supported all keys lost and damaged. It works through OBDII for Mercedes-Benz Smart Vehicles. So we also call it SMART Key Teach-in for Mercedes-Benz Smart Vehicles.

Mercedes Benz SMART Key teach in

SMART Key teach-in for Mercedes-Benz Smart vehicles (support car models from 1998~2002)

MB - Smart vehicles dongle key programmer

SMART Teach-in is required when keys are lost, damaged or if additional key is needed.

Also, this procedure synchronizes engine ECU with BSI - can be used when changing damaged ECU or BSI with new/used one!

For adapting each remote with Immobilizer / BSI module the following dongle can be used:

1. Turn ignition ON without starting engine (position "1").

2. Insert dongle in OBD connector (it is located under steering column, near pedals).

3. The LEDs must lit both, then green must blink few times. If all OK, green LED remains lit and red must be off. If red LED blinks fast, this means an error, you may remove dongle and try again.

4. If red LED is off and green is on, turn OFF the ignition key.

5. Press twice LOCK button on each remote (if 3 button remote used) within 30 sec. Maximum of 4 keys can be programmed.

6. Turn ignition ON again, this completes learning sequence. Remote controls are working only when ignition is OFF, cranking is possible only when vehicle is in UNLOCK-ed state.

 

This product was added to our catalog on Wednesday 08 May, 2013.

 
We Prefer PayPal Western Union HSBC Singapore Post UPS http://www.tnt.com http://www.ems.com.cn http://www.dhl.com
Copyright © 2017 Buyonme.net
Your IP Address is: 54.163.209.109
wastrong template